Both are acidic and both bond fast. A week in summer sun is enough to leave a mark that polishing cannot reach.
Columbus has a good tree canopy, and it drops on cars parked under it. Sap and bird droppings are acidic, they bond to the clear coat, and the damage is time-dependent. This page covers safe removal and what to do once it has etched.
Bird droppings contain uric acid, and on a warm clear coat the acid etches within a day or two. Sap is sticky resin that bonds to the surface and then to grit, so wiping it drags that grit across the paint and adds scratches to the etch.
The faster either is removed, the less the repair costs. A drop removed the same day is a wipe; one that sat through a hot week is a polish.
An etch that has dulled the surface but not broken through comes out with machine polishing. One that has gone through the clear coat shows as a darker or whitish mark and needs touch-up or paint.
A detailer should say which it is before quoting. Correcting a panel for an etch that a $20 remover fixes is an easy upsell, and the honest answer is worth asking for.
Yes. The uric acid etches the clear coat, quickly in warm weather. Remove it the same day where you can.
Soften it with a wet cloth or a dedicated remover, then lift it. Never scrape or scrub - sap holds grit that scratches the clear coat.
If the damage is in the clear coat, machine polishing removes it - paint correction at $700 to $900 by vehicle size at Curbside Mobile Detailing. Through the coat means touch-up.